What Is The Combined Warping Sizing Machine?

Combined warping-sizing ma-chine untwisted synthetic fiber filament warping and sizing combined processing equipment. It is a combined model of the creel of the batch warping machine and the filament sizing machine, which is used for the "filament sizing and sizing process" of standard two-stage processing. The filaments are drawn out from the creel, pass through the yarn separator, the yarn defect detector and the rear reed, and are collected into filaments that are drawn by the yarn take-off roller, and enter the size tank for sizing in the state of monofilament separation, and are then dried by hot air and drying cylinder. Then it is cooled, oiled or coated, and wound into a pulp shaft after passing through a static eliminator. The machine has high requirements on the quality of filaments, and when the quality of filaments is poor, sizing ends and twists will occur, which will affect the quality of the sizing shaft.

The Structure Of The Sizing Machine Includes:

①Insert the pulp tank, drying room and splitting mechanism behind the creel of the slitting warping machine, and then store the strips and reverse the shaft through the slitting and warping drum to make the pulp shaft that meets the requirements of the weaving technology.

②The combination of the creel of the batch warping machine and the filament sizing machine, the filaments are drawn out from the creel, passed through the dividing plate, the yarn defect detector and the rear reed, and then merged into a filament sheet, which is pulled by the yarn take-off roller. In the state of monofilament separation, it enters the pulp tank for sizing. After passing through the static eliminator, it is wound into a pulp shaft, and then thousands of pulp shafts are combined into a pulp shaft that meets the process design requirements through a parallel shaft machine.

The sizing machine is suitable for the production of small batches and multi-variety fabrics, and can be used for spinning, hemp spinning and chemical fiber processing. However, sizing combined processing has higher quality requirements for short fiber yarns or filaments. When the quality of raw materials is poor, sizing yarn breaks are likely to occur, which affects the quality of the sizing shaft and the processing efficiency. Warp yarns with high breakage rate are not suitable for sizing combined machine processing. In addition, the length of the warp yarn in the sizing machine is long, which is not conducive to the tension control of the warp yarn; the production efficiency is also relatively low.

Suzhou Sifang Technology Co., Ltd. is a professional textile machinery manufacturers, if you need to know more, please click the official website to contact us, we are willing to answer more for you